Check doors fire service urges businesses this Fire Door Safety Week

21/09/2026

Fire doors are often the first line of defence in a fire, especially overnight when people are asleep at their most vulnerable. Correct specification, installation, maintenance and management can be the difference between life and death for building occupants.

Despite this, fire door breaches remain one of the most common fines implemented under the Fire Safety Order, with common problems ranging from doors being wedged open, missing or damaged doors or even non-fire doors being installed in their place.

To help businesses, Cambridgeshire Fire and Rescue Service is encouraging building managers, landlords, tenants and all building users to check the operation and condition of their fire doors this Fire Door Safety Week, reporting issues needing repair or those that aren’t satisfactory. A new video animation has also been launched providing an introduction to checking fire doors and logging the information.

Station Commander Vinnie Crook, one of the Service’s fire protection managers, said: “Having effective fire doors and checking them regularly are vital for businesses premises. The difference that it can make in an emergency cannot be underestimated. Yet we often find that they are neglected and not maintained properly, putting premises and staff at risk. Our new animation provides business owners with a short introduction on what to check for and how to document the checks, which will be asked for during any fire safety audit.

“Fire doors are essential as they help to compartmentalise a building, such as a block of flats, keeping fire and smoke trapped for a while in one area, so that the fire can be tackled, and people can be safely evacuated.

“If you’ve seen a damaged fire door or know of a flat entrance door that hasn’t been checked for fire performance, report it to your landlord or building manager straight away and if you see a fire door propped open, make sure you shut it – a fire door cannot work when open.”

The Service is highlighting some simple tips that anyone can do to check a fire door, which lets you know whether it’s time to call in the professionals:

• Check for certification - Is there a label or plug on top (or occasionally on the side) of the door to show it is a certificated fire door?
• Check the gaps - Check the gaps around the top and sides of the door are consistently less than 4mm when closed.
• Check the seals condition - Are there any intumescent seals around the door or frame, and are they intact with no sign of damage?
• Check the hinges - Are the hinges firmly fixed (three or more of them), with no missing or broken screws?
• Check the door closes properly - Open the door about halfway, let go and allow it to close by itself. Does it close firmly onto the latch without sticking on the floor or the frame?

Our Business Safety section contains lots of helpful information for those responsible for looking after buildings, including more animations on various fire safety topics.